CMI-1000 Clamp meter with Certificate of Calibration
Measures AC+DC current and DC microamps
AC and AC+DC voltage measurements with digital low pass filter for accurate readings on variable frequency drives
Also measures DC voltage, resistance, capacitance, temperature and frequency
Tests continuity and diodes
Phase Sequence & Motor Rotation tests
Peak-RMS measures motor inrush current
Flashlight inside clamp jaw for easier work in dark locations
Backlight & relative mode for added versatility
AmpTip™ increases accuracy on small wires and low current
Two voltage detection modes - non-contact or using a single test lead
Data hold
Recording of Maximum, Minimum, and Average readings
Crest (peak hold) feature captures current or voltage peaks as short as 5 milliseconds
Lifetime warranty
Specifications
Amperage Measurement
60, 600, 1000 Amps AC+DC
Display
LCD, 6000 Count
Frequency Rating
Voltage: 50/60 Hz. Current: 40 to 400 Hz
Includes
(2) 1.5V AA batteries, test leads and clips, carrying case
Jaw Opening
2.0'' (51 mm)
Measurement Category
CAT III 1000V, CAT IV 600V
Replacement Part
02714 test leads and clips, TC-30 carrying case
Resistance Measurement
600, 6k, 60k Ohms
Standard
CAT IV, C/US UL Listed, CE
True Power
AC+DC True RMS
Voltage Measurement
600, 1000 Volts AC+DC
*Greenlee® may make improvements and/or changes in the specifications of products at any time, in its sole discretion, without notice or obligation and further reserves the right to change or discontinue models.
