iConverter Multi-Service Platform

Managed media converters, transponder, T1 multiplexer and CWDM multiplexer modules in a variety of chassis configurations.

Omnitron Systems

The Omnitron iConverter Multi-Service Platform is a modular range of network management, media converter, transponder and multiplexer modules that can be combined in a variety of chassis configurations. The iConverter platform provides a managed, flexible and scalable architecture for today’s evolving fiber networks. Network managers can leverage investments in existing infrastructure and deliver new services, protocols and data rates over fiber, and multiplex different services over a CWDM common fiber link

  • Deployed worldwide in service provider, enterprise, government and utility networks
  • Modular architecture of high-density chassis, plug-in modules and standalone modules
  • Manageable via SNMPv1/v2c/v3, Telnet and secure IP-less management
  • Commercial (0 to 50ºC), Wide (-40 to 60ºC) and Extended (-40 to 75ºC) temperature ranges
  • Select modules support SFP, SFP+ and XFP pluggable transceivers

Platform Features

  • Omnitron Lifetime Warranty on most products
  • Free 24/7 Technical Support
  • Made in the USA
  • Temperature Hardened
  • SNMP v3 Management
  • Scalable Architecture
  • NEBS Level 3 certified
  • UL, CE and FCC compliant
  • MEF 9, 14 and 21
  • ROHS and WEEE compliant

Technologies Supported

  • 10, 100, 10/100 Ethernet
  • 10/100/1000, Gigabit Ethernet
  • 10 Gigabit Ethernet
  • PoE/PoE+/PoE (60W)
  • 10G OTN (G.709)
  • T1/E1, T3/DS3/E3
  • OC3, OC12, OC48, OC192
  • RS-232/422/485/530, X.21
  • Fibre Channel
  • Protocol Transparent
  • CWDM

Network Interface Devices (NIDs)

GM3 vsm

iConverter carrier-class Ethernet Network Interface Devices (NIDs) are Carrier Ethernet 2.0 certified compliant to provide intelligent demarcation for Carrier Ethernet services. iConverter NIDs provide demarcation for Ethernet services delivered across one or more operator networks, with state-of-the-art provisioning, performance monitoring, protection and fault detection capabilities.

Click for more about iConverter Network Interface Devices


Media Converters and Transponders

10100 vsm

iConverter media converters provide seamless integration of copper and fiber and different fiber types. iConverter media converter modules support a wide variety of protocols, data rates and media types to create a reliable and cost-effective network. iConverter media converters support pluggable transceivers for flexible connectivity solutions for standard and CWDM wavelengths.

Copper-to-Fiber and Fiber-to-Fiber Media Converters


CWDM Multiplexers

CWDMAD vsm

iConverter CWDM Multiplexers/Demultiplexers and Add/Drop Multiplexers increase the bandwidth capacity of existing single-fiber or dual fiber infrastructure by multiplexing up to sixteen independent wavelengths over a fiber optic connection. The modular iConverter CWDM MUX products utilize a small and scalable plug-in form factor and can be installed in any iConverter chassis, achieving some of the highest port densities in the industry.

Learn more about iConverter CWDM Multiplexers


T1/E1 Multiplexers

5MODULE vsm

iConverter T1/E1 MUX products multiplex up to sixteen independent T1/E1 circuits and Ethernet from copper links onto a fiber link, CWDM wavelength or Ethernet Virtual Connection (EVC). Designed for mobile backhaul, and T1 demarcation extension up to 120km, iConverter T1/E1 multiplexers are available in modular or fixed chassis configurations with 4, 8, 12 or 16 T1/E1 ports.

Learn more about iConverter T1/E1 Multiplexers


Switch Modules and More

4TX vsm

The iConverter Multi-Service Platform also features four-port switch modules, redundant-link Ethernet media converters, and UTP to coax media converters. iConverter 10/100 and 10/100/1000 switch modules are managed four-port Ethernet switches that can be installed in a variety of chassis configurations with backplane connectivity to other iConverter modules.

Learn more about other iConverter Copper Switch Modules


Management System

netoutlook-ems

The iConverter management system provides the ability to remotely monitor network performance, configure hardware parameters and perform fault detection. The iConverter Multi-Service Platform can be managed with NetOutlook® SNMP Network Management Software. iConverter GM3 NIDs and GM4 NIDs can be managed with NetOutlook EMS Element Management System.

Learn more about NetOutlook and the iConverter Management System


iConverter Chassis Options

iconverter overview

Chassis options include high-density, rack-mount chassis for central office and network core deployments, and a variety of compact chassis for edge deployments. They feature redundant power supplies and data backplanes to provide the reliability and flexibility for today’s evolving network. DIN-Rail brackets and rack-mount shelves are also available.

Learn more about iConverter Chassis

Product was successfully added to your shopping cart.

Filter Products By

 Expand Filter Options
 Top