EOFY SPECIALS New FITEL Fusion Splicer Kits and Selected EXFO Testers View More

Norland Electronic Adhesive NEA 123HGA

SKU #NEA-123HGA
Low outgassing adhesive for HGA assembly or wire tacking.
  • $60 material handling charge applied to Norland adhesives ordered in Australia.
  • Please note the Minimum Order Quantity (MOQ) requirements, particularly for small volume Norland items.
As low as AU$27.87 AU$30.66
Typically Ships in 10 to 15 Business Days
Part Number
NEA-123HGA

Introduction

NEA 123 HGA is a low outgassing, one part, thixotropic adhesive similar to NEA 123. When exposed to UV light, it cures in seconds to a tack free, tough resilient polymer. After curing, subsequent outgassing is less than that from standard NEA 123. The tensile strength, modulus and the electrical resistivity of NEA 123 HGA are higher than the standard NEA 123; its elongation is less and other properties are comparable.

NEA 123 HGA is recommended as an extremely fast and efficient way to tack, fill, seal or bond precision components or wires in place. Applications include wire tacking, chip capacitor bonding, coil termination, tamper-proofing adjustable components, and bonding of head gimbal assemblies.

A drop of the adhesive is used to form a bridge between the component or wires and the substrate. Exposure to UV light quickly cures the adhesive and holds the components in place. Generally, about 6 joules/cm2 of UV cure energy are required for a full cure. The exact time depends on thickness, lamp intensity and individual requirements.

 

 

The adhesive was formulated to respond to the UV-A range of 320 to 390 nm. UV light sources with peak intensity near 365 NM (such as medium pressure mercury, halide or xenon lamps) are very effective. In addition to the UV cure, the NEA 123 HGA contains a latent heat catalyst that can quickly cure areas where the UV light cannot reach. The catalyst allows the adhesive to cure in 10 minutes at 125°C or 3 hours at 80°C. Thermal curing is not necessary if all the adhesive receives proper UV light. Heating a light-cured material may be redundant but will not be harmful and generally lowers the outgassing.

Oxygen inhibition is not a problem at 125°C, but at lower temperatures, adhesive directly exposed to air may still be tacky. An inert atmosphere (nitrogen) will allow tack-free low temperature curing. Below 70°C, curing is not practical. The cure process is exothermic whether accomplished by light or heat. Test samples should be allowed to return to room temperature before evaluating.  Adhesion of NEA 123 HGA is excellent for glass, silica, stainless steel, aluminum, copper and metals in general. Adhesion to plastics is fair to good for polypropylene, polycarbonate, acrylics, vinyl and polyacetal (DuPont's Delrin®).

Typical Properties of NEA 123HGA


 
Property of Cured Material Value
Mechanical
Tensil Modulus, ASTM D638-97 (psi) 321,000
Tensil Strength, ASTM D638-97 (psi) 3,790
Tensil Elongation at break, ASTM D638 (%) 25
Shore Hardness 60 D
Viscosity of uncured liquid, range (cps) at 25°C, 2 sec to the -1 power or 1 rpm 200,000-350,000
Electrical
Dielectric Constant, 1 MHz, IPC TM 650 2.4.4.3C 3.852
Dissipation Factor (1 MHz) 0.040
Resistivity, Volume, ASTM D257-93 (ohms-cm) 1.7 x 10 to the 15 power
Resistivity, Surface, ASTM D257-93 (ohms) >1.0 x 10 to the 15 power
Dielectric Strength, ASTM D149-97 (volts/mil) 814
Arc Resistance (sec) 100

 

 

NASA Outgassing Test, ASTM E-595-90

 
Type of Cure % Total
Mass Loss
% Collectable Volatile Condesable Material % Water Vapor Regain
UV-Cure (only) 1.74 0.03 0.20
UV-Cure plus 125°C/12 minutes 1.55 0.03 0.22

 

Handling and Storage Precautions

NEA 123 HGA may cause skin sensitization in some susceptible individuals. Avoid prolonged skin contact. We recommend wearing gloves made of latex or other impervious material. If contact occurs, wash with soap and water. Alcohol or other solvents should not be used for washing because they may remove the protective oils from skin. While the vapor pressure of NEA 123 HGA is low and the fumes not especially toxic, good manufacturing procedures dictate adequate ventilation. Read the accompanying MSDS for more details.

Although Norland Products' adhesives cure in seconds on exposure to UV light, they are very stable when not exposed to UV or excessive heat. Store in a cool, dark place. Refrigeration, while not generally necessary, is an ideal way to store NEA 123 HGA. If refrigerated, allow the material to come to room temperature before using. Exposure to direct sunlight or heat can cause an exothermic reaction and must be avoided.

 

More Information
Manufacturer Norland
Product Series Norland UV Curing Optical Adhesives
Industry Aerospace and Defence, Medical, Optical Equipment Manufacturing (OEM), Photonics, Research
Applications OEM (Optical Equipment Manufacturing), Assembling and disassembling multi-element systems
Standard Package Contains
Warranty Notes AusOptic Genuine Product Guarantee
Authorised distributor, benefit from manufacturer-backed, local warranty coverage, genuine parts, and our experienced local support team
Write Your Own Review
You're reviewing:Norland Electronic Adhesive NEA 123HGA
Your Rating
Customer Questions
No Questions
Did you find what you were looking for?
In This Series
  1. Norland Blocking Adhesive NBA 108
    Norland Blocking Adhesive NBA 108
    As low as AU$34.07 AU$37.48
  2. Norland Electronic Adhesive NEA 123THGA
    Norland Electronic Adhesive NEA 123THGA
    As low as AU$27.87 AU$30.66
  3. Norland Optical Adhesive NOA 170
    Norland Optical Adhesive NOA 170
    As low as AU$43.36 AU$47.70
  4. Norland Electronic Adhesive NEA 123BL
    Norland Electronic Adhesive NEA 123BL
    As low as AU$27.87 AU$30.66
  5. Norland Electronic Adhesive NEA 123S
    Norland Electronic Adhesive NEA 123S
    As low as AU$26.32 AU$28.95
Related Products
  1. Norland Optical Adhesive NOA 72
    Norland Optical Adhesive NOA 72
    As low as AU$26.32 AU$28.95
  2. Norland Optical Adhesive NOA 148
    Norland Optical Adhesive NOA 148
    As low as AU$26.32 AU$28.95
  3. Norland Optical Adhesive NOA 60
    Norland Optical Adhesive NOA 60
    As low as AU$26.32 AU$28.95
  4. Norland Electronic Adhesive NEA 123TKHGA 6g syringe (MOQ:3)
    Norland Electronic Adhesive NEA 123TKHGA 6g syringe (MOQ:3)
    AU$37.16 AU$40.88
  5. Norland Optical Adhesive NOA 13825
    Norland Optical Adhesive NOA 13825
    As low as AU$48.00 AU$52.80
Also Available
  1. Norland Optical Adhesive NOA 73
    Norland Optical Adhesive NOA 73
    As low as AU$26.32 AU$28.95
  2. Norland Electronic Adhesive NEA 123K
    Norland Electronic Adhesive NEA 123K
    As low as AU$26.32 AU$28.95
  3. Norland Electronic Adhesive NEA 155
    Norland Electronic Adhesive NEA 155
    As low as AU$40.26 AU$44.29
  4. Norland Optical Adhesive NOA 76
    Norland Optical Adhesive NOA 76
    As low as AU$26.32 AU$28.95
  5. SG Ferrule Mate 2.0 Cleaner SMA, 500 cleans
    SG Ferrule Mate 2.0 Cleaner SMA, 500 cleans
    AU$96.15 AU$105.77