NEW ADDRESS FOR AUSOPTIC From the 19th of November: Pinnacle Office Park, Suite 1.02, 4 Drake Avenue, Macquarie Park NSW 2113
 

Product was successfully added to your shopping cart.

Casting Resins, Adhesives and Sealing Accessories


Accessories for Wolf Sealing Technology


Wolf Petrolatum-Sealing Tape

Petrolatum-Sealing Tape

Permanently elastic sealing tape for various applications.

This highly resistant, permanently elastic, petrolatum-based sealing tape is a special development and fulfils demanding requirements regarding temperature and shape retention under pressure. The sealing tape does not adhere permenently to its surroundings, and thus enables speedy, problem-free removal of the sealing element.

Product PDF:
E-WO23.1 PAB - Short Info

Wolf QV Swelling Sealing Tape

QV Swelling Sealing Tape

Self-sealing (up to 10 m water column) on contact with water - seals immediately against water, dust, smoke and noise.

Self-sealing, nonwoven swelling material, consisting of mechani-cally preprocessed, heat-fixed, fibre-bonded material, made of PP fibres and special super-waterabsorbent fibres, UV-stabilised.

Swelling material, in combination with the QAK/V sealing system (WO16), is specially recommended for use in service entries for FTTH, photovoltaic, wind energy and biogas applications etc., where a grease-free seal (e.g. no dripping oil) is required.

Product PDF:
E-WO22.1-QV Sealing Tape - Short Info

Wolf Sealing and Spacer Clip

Sealing and Spacer Clip

For multi-configured cable ducts, Wolf sealing clips make sealing, simple, quick and easy.

The reusable sealing clip ADS-3K is made of polypropylene. Around the outer surface it has a strip of elastic sealing tape, which has ideal sealing properties and does not adhere permanently to other parts.

It facilitates quick, simple removal or subsequent retrofitting. In combination with the reusable (valve) sealing element, tightness is attained against temporary buildups of water, or pressurised water up to 4 m water column with temperature fluctuation (conductor short circuit).

Product PDF:
E-WO25.1 Sealing & Spacer Clip - Short Info

Pneumatic Accessories


ASI500 Compressor

Compressors

Portable compressor for filling sealing elements in reusable pressure-filled sealing systems. Features pressure presets in PSI or bar with automatic cut-off functions.

Product PDF:
E-WO33.1 Filling Devices and Accessories

Vacuum pump

Vacuum Pump

For simple, safe, speedy removal of the air out of the sealing element, ensuring problem-free installation.

Pneumatic hose accessories

Pneumatic Accessories

Pressure hoses, adaptors, ventil assembly sets, spare parts.

Cartridge Dispensers

Cartridge Dispensers

For work with our elastic sealing compounds, product groups WO27 and WO28, or with potting compound in double cartridges, product group WO35.

Casting Resins and Adhesives


Wolf EP 6476

EP 6476

Tension-anchor resin for cap-sealing optical and copper cables in work areas, storage places and route installations
For sealing microducts in FTTX applications

2-component solvent-free casting resin with an epoxy base. It has low viscosity and hardens within a short time to a solid mass with high mechanical and strength and temperature resistance.

EP 06476 adheres well to metals and various types of plastic and is used for encapsulating small areas. It is suitable for insulating electrical components, to relieve strain on cables and for the gas and watertight sealing of microducts in FTTX applications.

Temperature resistance:
  • -40°C to +150°C
  • Pot life: ~ 3 min
  • Curing time: ~ 3 h

Available as:
  • Small packages
  • Comp. A 60,3 g
  • Comp. B 29,7 g

Product PDF:
E-WO35.1 Quick-curing casting resin - Short Info

Wolf EP 5612

EP 5612

Potting compound for outdoor signalling, mining and telecommunication cables

2-component adhesive with an epoxy resin base. Due to its low viscosity it can be used as an adhesive or casting agent. Temperature resistance-20°C to +120°C Pot life: 16 min Hard to the touch: 4 h

Available as:
  • Double cartridges 400 ml
  • 320 ml component A
  • 80 ml component B

Product PDF:
E-WO35.2 Quick-curing casting resin - Short Info

Wolf PUR 5711

PUR 5711

Tension-anchor resin for cap-sealing optical and copper cables in work areas, storage places and route installations
For sealing microducts in FTTX applications

2-component solvent-free casting resin with an epoxy base. It has low viscosity and hardens within a short time to a solid mass with high mechanical and strength and temperature resistance.

EP 06476 adheres well to metals and various types of plastic and is used for encapsulating small areas. It is suitable for insulating electrical components, to relieve strain on cables and for the gas and watertight sealing of microducts in FTTX applications.

Temperature resistance:
  • -20°Cto +100°C
  • Pot life: 45 min
  • Hard to the touch: 45 min
  • Fully hardened after: 2 h

Available as:
  • Double cartridges 400 ml
  • 320 ml component A
  • 80 ml component B

Product PDF:
E-WO35.2 Quick-curing casting resin - Short Info

 Top